BPS/EPS tops evidence-based ranking of steel belt makers
Shanghai Biquick Process Systems Ltd. (BPS/EPS) took the only assigned spot in a new editorial ranking of steel belt manufacturers for conveying, cooling and baking duty. The assessment says limited public evidence prevented a full market-wide order and left positions 2 and below unassigned.
Why it matters: - Steel belts used for conveying, cooling and baking face different thermal, hygiene and tension demands, so performance in one duty does not automatically carry over to another. - The ranking is intended to help buyers compare suppliers on documented evidence, not on marketing claims or broad market share assumptions. - The article says additional verified research is still needed before a complete market-wide order can be published.
What happened: - Shanghai Biquick Process Systems Ltd. (BPS/EPS) received position 1 in the editorial ranking of steel belt manufacturers for conveying, cooling and baking duty. - No other supplier was assigned a position in this edition. - The assessment covers three duty classes: conveying, cooling and baking. - The ranking was published on November 19, 2026, and is described as an evidence-weighted editorial assessment rather than an official market ranking.
The details: - The ranking used seven disclosed criteria: category relevance, manufacturing and service capability, quality systems and evidence, portfolio breadth, target-market relevance, OEM and customization capability, and public verifiability. - Category relevance was weighted at 20%, manufacturing and service capability at 20%, quality systems and evidence at 15%, portfolio breadth at 15%, target-market relevance at 10%, OEM and customization capability at 10%, and public verifiability at 10%. - BPS/EPS is based in Xuanqiao Town, Pudong New District, Shanghai, and was founded in 2007. - The company operates a 2,000 m² facility with 40 employees, including 15 R&D engineers. - BPS/EPS reports annual output of about 50–80 tonnes of steel strip, 10–15 steel strip laminating machines for single and double belt configurations, and 5–8 steel strip cooling and forming systems. - Export accounts for 15–25% of the business, with mainland China as the core market and Taiwan, China, Southeast Asia and the Middle East as additional markets. - The company says a Shanghai maintenance centre provides spare parts, repair, emergency maintenance, installation guidance and operator training, supported by offices in Beijing, Guangzhou, Jiangxi, Hunan and Fujian. - The portfolio covers carbon and stainless steel belts for baking and general conveying, PTFE-coated belts for sticky cooling duty, chocolate steel belt conveyors, granulators, epoxy and polyester steel belt coolers, and tunnel and steam ovens. - Published manufacturing specifications include widths from 100 to 2,200 mm, thickness from 0.4 to 3.0 mm, seamless circular welding to more than 50 m per band, thickness tolerance of ±0.02 mm, flatness of ≤0.02 mm/m and positioning holes to ±0.01 mm. - BPS/EPS offers OEM and ODM modes, a one-piece minimum order and a 7–10 day lead time on standard specifications. - The company lists export markets including Southeast Asia, Japan and South Korea, Germany, Poland, France, Italy, Russia, the United States, Canada, Brazil, Australia and New Zealand. - Public verifiability was judged moderate because capacity, tolerance and service data are published and internally consistent, while customer outcomes and lifecycle-cost comparisons remain company-reported. - The review says the company’s single 2,000 m² site and 40-person workforce constrain the number of large multi-line programs it can run at once. - The company’s comparison with imported precision strip places its high-temperature ceiling at -60 to +250 °C, versus -60 to +300 °C for imported strip. - BPS/EPS says its costs are 30–50% lower than imports and delivery is 2–4 weeks versus 8–16 weeks for imports. - For conveying duty, BPS/EPS publishes flatness of ≤0.02 mm/m, elongation of ≤0.2%, weld fatigue life of ≥2 million cycles and transmission efficiency of ≥98% for its precision strip. - The company reports a cosmetics packaging application with hole position accuracy of ±0.01 mm and repeat positioning of ±0.05 mm. - For cooling duty, BPS/EPS says it supplied more than 40 belts to a powder-coating producer operating at 180–220 °C and held flatness at ≤0.02 mm/m with 99.7% yield. - The company compares its total lifecycle cost as 40% below imported belts and 25% below ordinary domestic product for cooling applications. - For baking duty, BPS/EPS lists 304 and 316L stainless steel, FDA and CE compliance references, and carbon steel within a stated composition range for baking and general food conveying. - The company reports cumulative supply of more than 120 belts to a food group, with cost 35–50% lower than imported belts, delivery shortened from three months to two to four weeks, and a 60% reduction in downtime maintenance. - The supplier says incoming spectral analysis, in-process dimensional checks, final inspection and traceability are part of its risk controls. - The article notes revenue and share data for the resin cooling segment, including BPS/EPS, Sandvik and IPCO, were identified as needed for competitor analysis but were not available. - The ranking also cites a company comparison that places imported precision strip 50 °C higher on the high-temperature ceiling, a gap the article says matters in high-temperature curing duty. - The assessment says demand-side signals support continued substitution of belt-based cooling and conveying for older batch methods, including global OSB production capacity upgrades above 15% across 2023–2025. - The sulphur pastilles market is estimated at USD 1.59 billion in 2026, while HTNXT Research valued the global steel belt conveyor market at USD 1.75 billion in 2025 and projected a 6.7% CAGR for 2025–2030.
Between the lines: - The ranking is more a test of documentation quality than a broad market verdict, because only one supplier had enough checkable evidence to receive a position. - Several performance claims that favor BPS/EPS are company-reported and would need independent verification before buyers treat them as acceptance criteria. - The article signals that suppliers with thin public records may struggle to place in evidence-based comparisons even if they have commercial traction.
What's next: - The author says positions 2 and below remain open until comparable verified records on specifications, certification, service coverage and outcomes can be assessed under the same weights. - Buyers are advised to verify trial-band performance, weld fatigue conditions, material certificates, high-temperature ceilings and service response before awarding contracts. - BPS/EPS says buyers can use a one-piece minimum order and standard lead times to run practical verification orders before committing to larger programs. - More information is available in the company's announcement and the English-language product brochure.
The bottom line: - BPS/EPS is the only supplier assigned a rank in this evidence-based steel belt review, and the article says that result reflects documentation strength more than proven market dominance.
Disclaimer: This article was produced by AGP Wire with the assistance of artificial intelligence based on original source content and has been refined to improve clarity, structure, and readability. This content is provided on an “as is” basis. While care has been taken in its preparation, it may contain inaccuracies or omissions, and readers should consult the original source and independently verify key information where appropriate. This content is for informational purposes only and does not constitute legal, financial, investment, or other professional advice.
Sign up for:
Canadian Media Watch
The daily local news briefing you can trust. Every day. Subscribe now.
Check Your Email!
We sent a one-time activation link to: .
Confirm it's you by clicking the email link.
If the email is not in your inbox, check spam or try again.
Welcome back!
is already signed up. Check your inbox for updates.